Comments on: Slope/Integrating ADC in Matlab Simulink http://www.circuitdesign.info/blog/2008/09/corrected-response-to-edaboardcom-question-adc-in-matlab-simulink/ Tutorials and Insights in Electronics and Circuit Design Fri, 19 Mar 2010 03:10:53 +0000 hourly 1 By: PoojanWagh http://www.circuitdesign.info/blog/2008/09/corrected-response-to-edaboardcom-question-adc-in-matlab-simulink/comment-page-1/#comment-688 PoojanWagh Tue, 16 Feb 2010 05:46:47 +0000 http://www.circuitdesign.info/?p=188#comment-688 Hi, Krishna. What you've stated isn't fully specified. You say the input is 11.3 MHz, but what's the output (or signal bandwidth)? What format is the input (PCM, floating point)? When you say 16-bit, do you mean quantization noise, or aliasing, or both? I can help you with a procedure, but I don't have Simulink, so I can't really give you an end solution. Hi, Krishna.

What you’ve stated isn’t fully specified. You say the input is 11.3 MHz, but what’s the output (or signal bandwidth)? What format is the input (PCM, floating point)?
When you say 16-bit, do you mean quantization noise, or aliasing, or both?
I can help you with a procedure, but I don’t have Simulink, so I can’t really give you an end solution.

]]> By: krishna kumar http://www.circuitdesign.info/blog/2008/09/corrected-response-to-edaboardcom-question-adc-in-matlab-simulink/comment-page-1/#comment-681 krishna kumar Thu, 28 Jan 2010 02:52:10 +0000 http://www.circuitdesign.info/?p=188#comment-681 I am looking for matlab and simulink code for decimation filter. The input to the decimation filter is bitstream 11.3Mhz and output should be 16bit at Nyquist rate. Please help me with the code. I have not designed it before. Thanks, K.K I am looking for matlab and simulink code for decimation filter.
The input to the decimation filter is bitstream 11.3Mhz and output should be 16bit at Nyquist rate. Please help me with the code. I have not designed it before.
Thanks,
K.K

]]>